JVC MC-8100U Service Manual

Contents

MC-8100U(5) During upper/lower limit check mode, the phase difference of the Up/Down rotary encoder is automatically checked and its resultis shown on the LCD display.2-12R U N N I N G M O D E3 5 : O K 4 – E N D“NG” appears when a failure occurs.Phase difference (%)2.2.2 Access Counter Clearance1. Set to display the contents shown on page 30 of the instruction manual.2. Hold the SELECT key until the unit to be cleared appears in the 1st line.3. With the unit counter to be cleared shown on the 1st line, hold the ENTER key for more than 5 seconds.2.2.3 Manual OperationM A N U A L M O D ES E L E C T : 0 0M A N U A L M O D E0 0Select SUBMODE using the numeric keysAfter selecting, press ENTER keyPressing numeric key 1 - 5 activates the corresponding operation(refer to the table on the this page).Function Numeric keyUpward normal moveUpward low-speed moveUpward 1-slit move toward leftUpward 1-slit move toward rightUpward 1-step advanceDuring key is ON (Condition: Tray lock initial position)During key is ON (Condition: Tray lock initial position)Each time key is ON (Condition: Tray lock initial position)Each time key is ON (Condition: Tray lock initial position)Each time key is ON (Condition: Tray lock initial position)1 Carrier Manual Operation· Carrier upward operation (SUBMODE = 00)Details12345Function Numeric keyDownward normal moveDownward low-speed moveDownward 1-slit move toward leftDownward 1-slit move toward rightDownward 1-step advanceDuring key ON, until lower limit sensor is reached (Condition: Tray lock initial position)During key ON, until lower limit sensor is reached (Condition: Tray lock initial position)Each time key is ON (Condition: Tray lock initial position)Each time key is ON (Condition: Tray lock initial position)Each time key is ON (Condition: Tray lock initial position)· Carrier downward operation (SUBMODE = 01)Details12345Function Numeric keyLeft tray lock releaseTray lock initialRight tray lock releaseDuring key ON, until left tray lock is releasedEach time key is ONDuring key ON, until right tray lock is released· Tray lock/release operation (SUBMODE = 02)Details123