25ENGLISHLabel surface(With a single-sided disc)MagazinesCAUTION• When loading discs directly into the magazine trays without using the mail slot, be careful not to damage the magazinesand trays.• A disc may become impossible to write/read due to dust, fingerprints, scratches, etc. adhering to the disc surface. Pleasehandle it carefully.• Take special care in handling the DVD-RAM discs because they are extremely vulnerable to scratches and contamination.1. Eject a magazine. (a See “9-1. Ejecting/loading themagazines” on page 24.)2. Unlock the tray lock corresponding to the tray to be used.(a See “2-3. Magazine numbers, tray numbers, discnumbers” on page 8.)30213. Pull out the tray.4. Place the disc on the tray.5. Push in the tray and lock the tray lock.6. Load the magazine in the changer. (a See “9-1. Eject-ing/loading the magazines” on page 24.)CAUTION(1) Place the disc correctly on the disc tray so that it doesstay in the guide section of the disc tray.(2) To prevent projection of a tray or incomplete lockingof the tray lock, align the edges of all the trays in themagazine by slightly pushing them inward from.(3) Always handle the magazine the correct way.Holding or placing a magazine upside down or on itsside may cause the discs to slip out of position andresult in malfunction.9-2. Loading/replacing the discs
