Menu
JVC LX-WX50 User Manual
                                                   |
34 Controlling the projector remotelyiii. Press Exit to go back to the remote network operation page.5. After pressing the button ‘Contact IT Help’, the HELP DESK window will appear at the upperright corner. You will be able to deliver messages to RoomView™ software which isconnected to the same local area network.For more information, visit http://www.crestron.com & www.crestron.com/getroomview.Controlling the projector using PJLink™This projector supports standard protocol PJLink™ for projector control and you can control andmonitor projector's operations using the same application among projectors of different modelsand different manufacturers.About PJLink™• To use PJLink™ function, the PJLink™ application software is required.• For the specifications of PJLink™, access to the Web site of Japan Business Machine andInformation System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)• This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supportsall the commands defined by PJLink™ Class 1, and the compliance has been verified withthe PJLink™ standard specifications Version 1.4.Utilizing the PJLink™ password functionTo prevent unauthorized connection to the projector via PJLink™ application, the projectorincludes an option for setting up password security.To access the OSD menu, see "Using the OSD menu" for details.1. Go to SYSTEM SETUP: Advanced > LAN Settings, and press ENTER.2. The LAN Settings page is displayed.3. Press to select PJLink Certification and press / to select On. The default password is"admin".4. Press to select Change Password and press ENTER.5. Enter the current password. Press / to select the digit and press / to select from 0-9,A-Z, a-z or symbols. Press ENTER to confirm.If you forget the password, please use the password "projectorcontroller".PJLink™ supported commandsCommend Description Remark (Parameter)POWR Power control 0 = Power off1 = Power onPOWR? Inquiry about the power state0 = Standby1 = Power on2 = Cooling down3 = Warming up |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved