9ENGLISHInstallation settingsWhen you turn on the unit for the first time, the initialsetup screen appears.1 Turn on the ignition switch.The power is turned on, and the startup screen isdisplayed for about 5 seconds.2 Select the language you want for the displayand the voice guidance.• You can also select the system language throughthe AV menu (<Settings> - <System> -<Language>, ☞ page 75)3 Display installation settings screen.• If you select [Skip Installation Settings (forStore Display)], the System starts in the storedisplay mode.You need to make the installation settings nexttime you turn on the power.– When you turn on the power, <SelectLanguage> appears. After selectingthe language, the confirmation messageappears. Press [Yes] so that the System startsinitialization. When initialization is complete,<Select Language> (☞ Step 2 above) isdisplayed.4 Adjust the settings.State/ProvinceSelect the State or Province whereyou are now.Time Zone * Select your residential area forautomatic clock adjustment byGPS signal.DST * Select <Auto> if your residentialarea is subject to Daylight SavingTime.ReverseSignalPolarity *Select the reverse signal polarity(<Battery> or <GND>)according to the connection ofyour car.CameraInput *Select <On> when connectingthe rear view camera to theCAMERA IN jack.* You can also change these settings through the AVmenu (<Settings>, ☞ page 75).5
