JVC KW-NT1 Instructions Manual

Also see for KW-NT1 - Navigation System With DVD player: Installation & connection manual Installation & connection manual Instructions Instructions

Contents

9ENGLISHInstallation settingsWhen you turn on the unit for the first time, the initialsetup screen appears.~ Turn on the ignition switch.The power is turned on, and the opening screen isdisplayed for about 5 seconds, then the languageselection screen is displayed.Ÿ Select the language you want for thedisplay and the voice guidance.• You can also select the system languagethrough <Language>. (☞ page 70)! Display installation settings screen.• If you select [Skip Installation Settings(for Store Display)], the System starts in thenavigation demonstration mode for stores.You need to make the installation settingsnext time you turn on the power or detach themonitor panel (then attach it).• When selecting [Start InstallationSettings], <Demonstration> is set to<Off>. (☞ page 69)⁄ Adjust the settings.State/ProvinceSelect the State or Provincewhere you are now.Time Zone *1 Select your residential area forautomatic clock adjustment byGPS signal.DST *1 Select <Auto> if yourresidential area is subject toDaylight Saving Time.ReverseSignalPolarity *1Select the reverse signal polarity(<Battery> or <GND>)according to the connection ofyour car.CameraInput *2Select <On> when connectingthe rear view camera to theCAMERA IN jack.*1 *2 You can also change these settings through<Settings>. (*1: ☞ page 70 /*2:☞ page 69)@¤ Finish the procedure.