JVC KM-H3000 User Manual

Also see for KM-H2500: Instructions Manual 

355. Press the Confrm knob to commit the change.Press the Cancel knob to cancel the change andreturn to the previous setting.Resetting the SwitcherResetting the switcher restores the user-defineddefault settings..To reset the switcher:1. Press and hold MENU.2. Press the RESET Wipe Pattern button.To reset the switcher using an alternate method:1. Press MENU.2. Press the RESET Wipe Pattern button.3. Press the RState Load knob.All switcher settings are restored to the defaultvalues.Shared ParametersSome parameters are shared between features and ifreset in one area, are reset in all areas that share thatparameter. The shared parameters are:• Time — This value is shared between dissolves,wipes, and DVE transitions.• Limit — This value is shared between dissolves,wipes, and DVE transitions.• Pattern (Pattrn) — This value is shared betweenwipes and mattes.Resetting Individual SettingsYou can reset individual settings to default valuesrather than resetting the entire switcher.To reset wipes:1. Press and hold down WIPE.2. Press the RESET Wipe Pattern button.To reset dissolves:1. Press and hold down DISS.2. Press the RESET Wipe Pattern button.To reset Key 1:1. Press and hold down CHR KEY, AUTO SELECT,or DVE.2. Press the RESET Wipe Pattern button.Note:• The selected Chroma Key color and any Split Keyassignments are not reset.To reset Key 2 or 3:1. Press and hold down KEY 2 SEL (or KEY 3 SELon the KM-H 3000).2. Press the RESET Wipe Pattern button.When resetting a key, the selected Chroma Keycolor and any Split Key assignments are notreset.Note:• The selected Chroma Key color and any Split Keyassignments are not reset.To reset Aux buses:1. Press and hold down AUX SEL (KM-H 2500) orAUX 1 or AUX 2 or AUX 3 (KM-H 3000).2. Press the RESET Wipe Pattern button.Resetting Menu ItemsThe values for particular parameters can be resetindividually. This allows you to restore the defaultsetting if you are unsatisfied with the adjusted values.Some parameters are shared between features and,if reset in one area, will be reset in all areas that sharethat parameter.To reset individual menu items:1. Select the menu for the value you wish to reset.2. Double press the knob associated with the value.Restoring to Factory DefaultsYou can restore your switcher to the factory defaultsettings. You may wish to do this whentroubleshooting problems with your switcher.Restoring to factory defaults resets the entireswitcher. Save any configuration information to amemory register if you wish to re-load it afterperforming the factory default.21