JVC KD-G401 Instructions Manual

Also see for KD-G401: Instructions Installation & connection manual Service manual Service manual Manual

14ENGLISH Using PTY Standby ReceptionPTY Standby Reception allows the unit to switchtemporarily to your favorite programme (PTY:Programme Type) from the current source(another FM station or CD).• PTY Standby Reception will not work if you arelistening to an AM station.You can select your favorite programme type forPTY Standby Reception.When shipped from the factory, PTY StandbyReception is turned off. (“OFF” is selected forPTY Standby Reception.)1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(PSM: see page 31.)2 Select “PTY STBY” (standby) if notshown on the display.3 Select one of the twenty-nine PTYcodes. (See page 18.)Selected code nameappears on the displayand is stored intomemory.4 Finish the setting.7 When the current source is FM, the PTYindicator either lights up or flashes.• If the PTY indicator lights up, PTY StandbyReception is activated.If a station starts broadcasting the selectedPTY programme, this unit automaticallytunes in to the station.• If the PTY indicator flashes, PTY StandbyReception is not yet activated since thestation being received does not provide thesignals used for PTY Standby Reception.To activate PTY Standby Reception, youneed to tune in to another station providingthese signals. Press ¢ or 4 tosearch for such a station.When a station providing these signals istuned in, the PTY indicator stops flashingand remains lit. Now PTY Standby Receptionis activated.7 When the current source is other than FM,the PTY indicator lights up.If a station starts broadcasting the selectedPTY programme, this unit automaticallychanges the source and tunes in to the station.To deactivate the PTY Standby Reception,select “OFF” in step3 on the left column. ThePTY indicator disappears.