JVC KD-G401 Instructions Manual

Also see for KD-G401: Instructions Installation & connection manual Service manual Service manual Manual

13ENGLISH1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(PSM: see page 31.)2 Select “AF-REG” (alternativefrequency/regionalization reception)if not shown on the display.3 Select the desired mode—“AF,”“AF REG,” or “OFF.”4 Finish the setting.Using TA Standby ReceptionTA Standby Reception allows the unit to switchtemporarily to Traffic Announcement (TA) fromthe current source (another FM station or CD).• TA Standby Reception will not work if you arelistening to an AM station.Press TP PTY to activate TA Standby Reception.7 When the current source is FM, the TPindicator either lights up or flashes.• If the TP indicator lights up, TA StandbyReception is activated.If a station starts broadcasting a trafficannouncement, “TRAFFIC” appears on thedisplay, and this unit automatically tunes in tothe station. The volume changes to thepreset TA volume level (see page 17) and thetraffic announcement can be heard.• If the TP indicator flashes, TA StandbyReception is not yet activated since thestation being received does not provide thesignals used for TA Standby Reception.To activate TA Standby Reception, you needto tune in to another station providing thesesignals. Press ¢ or 4 to searchfor such a station.When a station providing these signals istuned in, the TP indicator stops flashing andremains lit. Now TA Standby Reception isactivated.7 When the current source is other than FM,the TP indicator lights up.If a station starts broadcasting a trafficannouncement, “TRAFFIC” appears on thedisplay, and this unit automatically changes thesource and tunes in to the station.To deactivate the TA Standby Reception,press TP PTY again. The TP indicatordisappears.