JVC KA-MR100G Instructions Manual

Also see for KA-MR100G: Service manual

Contents

13MenuSetting Item Setting Values FunctionsTC SET2 For presetting the time code generator of the memory recorder.TC PRESET (00:00:00:00) _ 23:59:59:29or(00:00:00:00) _ 23:59:59:24The number of frames that can be specified are as shown below, depending onthe setting of the frame rate. (e.g., when the frame rate is 60, you can specify thenumber of frames up to a value of 58.)UB PRESET (00:00:00:00) _ FF FF FF FF For presetting the user bit. (8 digits)CLIP NAME For specifying the first four characters of the clip name before recording, orresetting the clip number.● An eight-digit clip name is automatically configured.● Serial numbers are automatically appended as the last four digits whenever aclip is created. Serial numbers are automatically appended even when SxSmemory card is replaced or after changing the first four characters of the clipname at APREFIXB.PREFIX (Last three digit of the serialnumber + K)For specifying the first four characters of the clip name.(Usable characters: A to Z, a to z, 0 to 9, -, _)The default clip name is set as the “last three digits of the serial number + K”.Example: If the serial number is 00001234, then the default clip name is 234K.NUMBERRESETYESNOYou can reset the clip number (0001) after changing the clip name at APREFIXB.If clips already exist on the SxS memory card, the smallest available number willbe used.Example: If 0001 exists on the SxS memory card, then 0002 will be used.YES : Reset clip number. (Press the [INFO/CLR] button.)NO : Do not reset clip number. (Press the [STOP] button.)CLOCK1 For configuring settings related to the clock of the memory recorder.TIME ZONE UTC-12:00 _(UTC-05:00) _ UTC+14:00For setting the time difference with the UTC (Universal Time Coordinate).AUTC Time Difference Chart by RegionB (A Page 17)When the setting of this item is altered, the [DATE]/[TIME] values below will beautomatically adjusted.DATE (--/--/--) For setting the date (month/day/year). The last two digits of the western calendaris used.Press the [INFO/CLR] button to display the default setting.TIME (--:--:--) For setting the time (hour:minute:second).Press the [INFO/CLR] button to display the default setting.CLOCK2 For setting the date or time display mode.DATE STYLE YY/MM/DD(MM/DD/YY)DD/MM/YYFor specifying the display style of the date.● Altering the setting of this item also changes the [DATE] display mode on the[CLOCK1] setting screen.YY/MM/DD : Year/Month/DayMM/DD/YY : Month/Day/YearDD/MM/YY : Day/Month/YearTIME STYLE 12(24)For specifying the display style of the time.● Altering the setting of this item also changes the [TIME] display mode on the[CLOCK1] setting screen.12 : 12-hour display (AM/PM display)24 : 24-hour displayMEDIA For setting processes related to the SxS memory card.FORMAT YESNOStarts the formatting (initialization) of the SxS memory card.● When formatting is performed, all clips stored inside the SxS memory card willbe cleared.YES : Format. (Press the [INFO/CLR] button.)NO : Do not format. (Press the [STOP] button.)RESTORE YESNOScans the SxS memory card and makes attempts to restore damaged clips.● However, success of the restore process is not guaranteed.YES : Execute. (Press the [INFO/CLR] button.)NO : Do not execute. (Press the [STOP] button.)OTHER For configuring settings related to the control buttons and menus of the memoryrecorder.OPERATION (UNLOCK)LOCKYou can disable the button control of the memory recorder to avoid misoperationsduring shooting.UNLOCK: Enables all buttons.LOCK : Button control is disabled, with the exception of the following.● Record/Standby (REC trigger button of the camcorder)● Menu screen display ([MENU] button)● Power On ([POWER] button)ALL RESET YESNOFor resetting the menu settings of the memory recorder to the default values.YES : Restore default settings. (Press the [INFO/CLR] button.)NO : Do not restore default settings. (Press the [STOP] button.)Frame rate 60 50 30 25 24Number of frames 58 48 29 24 23