JVC KA-MR100G Instructions Manual

Also see for KA-MR100G: Service manual

Contents

11MenuProcedures for Setting Values1 Press the [MENU] button2 Move the cursor ( ) to the item to be set bypressing the [NEXT] or [PREV] button3 Press the [PLAY/STILL] or [FWD] button4 Move the cursor ( ) to the value to be set bypressing the [NEXT] or [PREV] button5 Press the [PLAY/STILL] button to confirm thesetting● The menu screen appears after the setting is changed.Memo :● When the setting screen is displayed, pressing the [STOP]or [REV] button returns the display to the menu screenwithout altering the setting value.6 Press the [MENU] button to exit the menu screendisplayProcedures for Executing theUtilities1 Select a menu item to display the executionscreen of the corresponding utilityThe different utility items are shown below.● [NOW CLIP] and [ALL CLIP] of the [DELETE] settingscreen● [ALL OK] and [ALL NONE] of the [OK CLIP] setting screen● [NUMBER] of the [CLIP NAME] setting screen● [FORMAT] and [RESTORE] of the [MEDIA] setting screen● [ALL RESET] of the [OTHERS] setting screen2 Press the [INFO/CLR] button to execute theselected item● When [FORMAT] or [RESTORE] is completed,ACOMPLETEB appears on the LCD display.● When [FORMAT] or [RESTORE] is in progress,AEXECUTEB appears on the LCD display. If failure occurs,AERRORB is displayed.● After the execution message appears, the display returnsto the menu screen.● All operations are disabled during execution of a utility.Memo :● Press the [STOP] button to return to the menu screenwithout executing the selected item.Procedures for Setting Time Code/User Bit Preset, Clip Name andDate/Time1 Select a menu item from Time Code/User BitPreset, Clip Name and Date/Time● Time Code Preset/User Bit Preset :[TC PRESET]/[UB PRESET] of the [TC SET2] settingscreen● Clip Name setting :[PREFIX] of the [CLIP NAME] setting screen● Date/Time setting :[DATE]/[TIME] of the [CLOCK1] setting screenMemo :● During setting of the time code, user bit or time, pressingthe [INFO/CLR] button sets all digits to “00”. In the clipname setting, the default clip name is shown.2 Press the [FWD] or [REV] button to select theitem to set3 Alter the value of the selected item by pressingthe [NEXT] or [PREV] button4 Press the [PLAY/STILL] button to confirm thenew value● The menu screen appears after the setting is changed.Memo :● When the setting screen is displayed, pressing the [STOP]button returns the display to the menu screen withoutaltering the setting value.Setting the Menu Screen[PREV]button[REV] button[PLAY/STILL] button[FWD] button[STOP] button[NEXT] button[INFO/CLR] button[MENU] buttonMenu screenSetting itemCurrent setting valueCurrent selected setting itemCursorCurrent selected setting valueSet using [PLAY/STILL] buttonReturn to the menu screen without settingusing [STOP] buttonReturn to the menu screen withoutsetting using [STOP] buttonExecute with [INFO/CLR] buttonUtility item being selectedReset to A00:00:00:00B with [INFO/CLR]buttonCurrent selected setting itemSet using [PLAY/STILL] buttonReturn to the menu screen without settingusing [STOP] button