JVC HM-DH30000U Instructions Manual

Also see for HM-DH30000U - D-VHS HDTV Digital Recorder: Service manual Service manual

Contents

38 ENTIMER RECORDING (cont.)You can directly program the VCR’s timer to record up to24 broadcasts, as far as a year in advance. Remember,the clock must be set before you can program the timer( pg. 10).1 Load a cassetteMake sure the record safety tab is intact. If not,cover the hole with adhesive tape, then load itinto the VCR.● The VCR turns on, and the counter is reset,automatically.2 Access VCR PLUS+ screenPress PROG..3 Access Program screenPress START +/– once.4 Set program start timePress START +/–repeatedly to enter thetime you wantrecording to start.● Press and hold START+/– to increase thetime in 30-minuteintervals.5 Set program stop timePress STOP +/– repeatedly to enter the time youwant recording to stop.● Press and hold STOP +/– to increase the time in30-minute intervals.6 Set program datePress DATE +/–. (The current date is displayed onthe screen. The date you enter appears in itsplace.)7 Set channel numberPress CH +/–.● If you are using a DBS receiver, see“ATTENTION FOR DBS RECEIVER USERS” onnext page.● Holding down CH +/– rapidly changes thechannel numbers.Express TimerProgramingTurn on the VCR and the TV, and select the AVmode on the TV.11 2 34 5 67 8 90VCR TV CABLE/DBSWEEKLY0DAILY (M-F)8POWER92 93 – 7DBSPROGRAMSTART STOP DATE– –:– –AM – –:– –AM – –/– –/– –CH SUN– – – STD (SP)PRESS (+/–, SP/EP, 8=DAILY9=WEEKLY) THEN (OK)PRESS (PROG.) TO ENDPROGRAMSTART STOP DATE8:00 AM – –:– –AM – –/– –/– –CH SUN– – – STD (SP)PRESS (+/–, SP/EP, 8=DAILY9=WEEKLY) THEN (OK)PRESS (PROG.) TO END