JVC HM-DH30000U Instructions Manual

Also see for HM-DH30000U - D-VHS HDTV Digital Recorder: Service manual Service manual

Contents

EN 27To pause recordingPress PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).To stop recordingPress STOP ( 7 ) on the Remote or STOP/EJECT ( 7/0 )on the front panel.To rewind the tape (when it is not running)Press REW ( 1 ).To fast-forward the tape (when it is not running)Press FF ( ¡ ).To eject the tapePress STOP/EJECT ( 7/0 ) on the front panel when thetape is not running.● You can also eject the cassette when the VCR is turnedoff.To turn off the VCRPress POWER.NOTE:If “MEMORY FULL” appears on the display when you startrecording, the VCR’s memory for the Video Navigation functionis full. This is not related to actual recording, so you can finishrecording normally, but the Video Navigation information suchas recording date, start time, end time, and channel number willnot be stored in memory.It may be unlawful to record or play backcopyrighted material without the consent of thecopyright owner.S-VHS/VHS Recording1 Load a cassetteMake sure the record safety tab is intact. If not,cover the hole with adhesive tape beforeinserting the cassette.2 Select recording channelOn the front panel:Press CH + or –.On the Remote:a– Press CH + or –.orb– Press the Number keys.3 Set tape speedPress HS/STD/LS3/SP/EP ( ) to set therecording speed.4 Start recordingOn the front panel:Press REC ( ¶ ).On the Remote:While holding REC ( ¶ ), press PLAY ( 3 ).● If “V, CALIBRATION” is set to “ON” (defaultsetting: Z pg. 53), this VCR checks the tapecondition for about seven seconds, then startsrecording. This means that the first sevenseconds of the program will not be recorded. Ifthis is inconvenient for you, follow the stepsbelow:1 Press REC ( ¶ ) and PAUSE ( 8 ) to startVideo Calibration.2 Then press PLAY ( 3 ) to start recordingafter Video Calibration is complete.Compatibility Of Cassettes And Recording ModeCassetteRecording ModeD-VHS S-VHS VHSD-VHS Yes Yes YesS-VHS No Yes YesVHS No Yes* Yes* To record on the VHS cassette with S-VHS quality, use the S-VHS ET function. (Zpg. 29)NOTES:●The D-VHS (MTP), S-VHS and VHS mode recordings arepossible with this VCR.●To record in the D-VHS mode, use a D-VHS cassette.●To record in the S-VHS/VHS mode, you can use a D-VHS,S-VHS or VHS cassette.To record in S-VHS mode on D-VHS tapes:Press D-VHS to turn off the D-VHS indicator. Then, set“S-VHS MODE” to “ON” (Z pg. 57).To record in VHS mode on D-VHS tapes:Press D-VHS to turn off the D-VHS indicator. Then, set“S-VHS MODE” to “OFF” (Z pg. 57).