JVC GM-V42UB Instructions Manual

Also see for GM-V42UB: Instructions Service manual

Contents

@@ @@@ @ @u uLS LS@@ @@@@@_oiVIDEO A terminals (page 12)AUDIO (L/MONO, R) input terminals (pin jack)Connect these terminals to the audio input terminals of aVCR, etc.• VIDEO IN terminal (BNC)Connect this terminal to the video output terminal of aVCR, etc.• VIDEO OUT terminal (BNC)Connect this terminal to the video input terminal ofanother Monitor.Note:o Since the video output terminals on this Monitor areloop-through terminals, the devices connected to thisvideo output terminal should be correctly terminated.Otherwise, pictures become abnormally bright or theMonitor screen gets affected abnormally.VIDEO B terminals (page 12)• AUDIO (L/MONO, R) input terminals (pin jack)Connect these terminals to the audio output terminals ofa VCR, etc.• Y/C (S video) IN terminal (mini DIN 4pin)Connect this terminal to the S-video output terminal of aVCR, etc.. VIDEO IN terminal (pin jack)Connect this terminal to the video output terminal of aVCR, etc.Note:o When both the video and S-video terminals areconnected, the S-video terminal will have priority.11] COMPONENT/RGB B input terminals (page 12)• AUDIO (L/MONO, R) input terminals (pin jack)Com_ect these terminals to the audio output terminals ofthe other equipment.. G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC)Connect these terminals to the following outputterminals of a personal computer or other equipment:- Analog RGB signal output terminals- Horizontal sync (HD) signal or composite (Cs) signaloutput terminal- Vertical sync (VD) signal output terminalNotes:o External sync signals are automatically detected whenthey come in.o When both horizontal (HD)/vertical (VD) sync andcomposite (Cs) sync are connected, HD/VD sync signalswill be used.• Y, Pb, Pr (VIDEO) input terminals (BNC)Connect these terminals to the component signal outputterminals of N['SC or high-vision equipment.Note:• When these terminals are used as the componentterminals (Y, Pb, Pr)--see "Setting the COMPONENT/RGB B ]input" on page 22, external sync signals (HD/Cs,VD) cannot be used.7