JVC GM-V42UB Instructions Manual

Also see for GM-V42UB: Instructions Service manual

Contents

START TIMEYou can adjust the time to activate the function., Set the hour and minute following steps 4 to 6 in"Setting the Clock" (page 28).END SETYou can activate/deactivate the Color-Reverse Off Timer., Press 4/_,- to select "ON" or "OFE"ON: The function is automatically deactivated at thetime set in "END TIME."OFF: The Color-Reverse Off Timer is deactivated.4END TIMEYou can adjust the time to deactivate the function., Set the hour and minute following steps 4 to 6 in"Setting the Clock" (page 28).Press MENU/EXIT (or MENU on theMonitor) repeatedly to exit from themenu operations.To cancel the Color-Reverse function immediatelyRepeat steps I to 3, then,elect Olaf in "COLOP,-REVERSE"by pressing 4/_.3 Press A/T to select the item you wantto set and set the item as follows.REFRESHYou can activate/deactivate the function manually., Press 4/_ to select the desired setting.ON: The function is activated immediately afterexiting the menu operations.OFF: The function is deactivated.TIMER: Select this when you use the Refresh On/OffTimer.Note:* Set the clock (see page 28) and select "TIMER," beforeusing the Refresh On/Off Timer.START SETYou can activate/deactivate the Refresh On Timer.* Press 4/_- to select "ON" or "OFE"ON: The function is automatically activated at thetime set in "STAR F TIME."OFF: The Refresh On Timer is deactivated.START TIMEYou can adjust the time to activate the function.* Set the hour and minute following steps 4 to 6 in"Setting the Clock" (page 28).After the power is turned off, a whitish image may be left onthe screen. In that case, leave the monitor in a white back statefor a while, and the image will disappear.On the remote control:Press MENU/EXIT while holdingVOLUME - to display the Setup Menu.On the Monitor:Press MENU while holding 4 to displaythe Setup Menu.Cursor(_)-

MENU> 1/2TUS DISPLAY : OF_NTROL LOOK : OF_REMOTE SWITCH : MODE1ND S_GNAL MODE : 1080iWN_TE BALANOET_MERADJUST:[_ SELECT:r_ E X J T :I_ENU]2 Press A/v to move the cursor (_) to"REFRESH" (on the second page) thenpress _.* '['he Setup Menu consists of two pages. If you keeppressing A/v, you can move to the other page fromthe current page.END SETYou can activate/deactivate the Refresh Off Timer.Press 4/_,- to select "ON" or "OFE"ON: Ehe function is automatically deactivated at thetime set in "END EIME."OFF: The Refresh Off Timer is deactivated.4END TIMEYou can adjust the time to deactivate the function., Set the hour and minute following steps 4 to 6 on"Setting the Clock" (page 28).Press MENU/EXIT (or MENU on theMonitor) repeatedly to exit from themenu operations.To cancel the Refresh function immediatelyRepeat steps It( 3, then,elect OFF in "REFRESH" bypressing 4/_.

MENU> 2/2I)P_XEL SH_FT : OFFPOWER SAVE : OFFOOLOR-REVERSEREFRESH_reset_al_ resetHOUR METER xl00h : 123MODEL NAME : GM-V42UGADJUST:_]_]SELECT:[_ E X I T :IMENU]31