JVC DD-1 Instructions Manual

Also see for CA-DD1: Instructions Instructions

Contents

40Convenient functions of disc/file playback??AUDIOItems Contents ( : initial setting)DIGITALAUDIOOUTPUTSelect the output signal type suitable tothe device connected to the [LINE-DIGI-TAL OUT] terminal. Refer to “List of rela-tionships of DIGITAL AUDIO OUTPUTpreference items and output signal” onpage 41.PCM ONLY :Device corresponding only to linear PCM.DOLBY DIGITAL/PCM :Dolby Digital decoder or device havingthe same function.:DTS/Dolby Digital decoder or device hav-ing the same function.DOWN MIX Select the signal suitable to the deviceconnected to the [LINE-DIGITAL OUT]terminal. Set “DOWN MIX” only when“DIGITAL AUDIO OUTPUT” is set to“PCM ONLY”.DOLBY SURROUND :Dolby Pro Logic decoder-built-in device.:Ordinary audio device.D (Dynamic).RANGECOMPRESSIONTo correct the difference between highvolume and low volume when playingback with low volume (only for a DVDrecorded with Dolby Digital).WIDE RANGE :For enjoying the original full dynamicrange of surround sound without effects.:For normal usage. Surround sound iscompressed to a certain level.HDMIAUDIO OUTYou can select whether or not the audiosignal from the [HDMI] terminal is output.ON :The audio signal from the [HDMI] is out-put.:The audio signal from the [HDMI] is notoutput.NOTE• Depending on the connected TV, when“HDMI AUDIO OUT” is set to “ON”,only PCM signals can be output via anHDMI cable.STREAM/PCMSTEREONORMALOFF??OTHERSItems Contents ( : initial setting)RESUME Select or OFF. (Refer to page 28.)ONSCREENGUIDESelect or OFF. (Refer to page 27.)DivXREGISTRA-TIONThe main unit has its own registrationcode. You can confirm the registrationcode, when necessary. Once you haveplayed back a disc/file on which the regis-tration code is recorded, the registrationcode of the main unit is overwritten forcopyright protection.NETWORKSETUPFor DD-8/DD-3 users:Refer to the separate volume of the oper-ation manual for the network function.For DD-1 users:This item is not available.ONON