JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

Also see for BR-HD50U - Compact HDV/DV Format Video Recorder: Information sheet Instruction manual Firmware upgrade guide

Contents

E-81OTHERSTroubleshootingSymptom ActionNo power. Is the AC adapter correctly connected?Unable to record. Is the slide of the cassette tape turned to “REC”?Set it to “REC” if it is at the “SAVE” position.The operation buttons of BR-HD50do not work.Is OPERATION LOCK of the SYSTEM [2/2] Menu set to ON?Set it to OFF if the operation buttons are to be used.For REMOTE, select the buttons that can be operated with theLOCAL FUNCTION Menu.Editing cannot be controlled evenafter the REMOTE/LOCAL switchis set to REMOTE.To control with RS-422A, set REMOTE SEL 9P in the REMOTE[1/2] Menu screen to “ON”.Noise is produced on the playbackvideo.Playback sound interrupted.• The tape is damaged.Replace the tape.• The head is dirty.Clean it with the specified head-cleaning tape. (XPage 9)Cannot play back. Is the setting for PB TAPE FORMAT in the SYSTEM [2/2] Menuscreen something other than AUTO?Playback is not available when this menu item does not matchthe tape format.Time codes are not correctlyrecorded during DV signal input.Is TC DUPLI. in the TC/UB/CLOCK [1/2] Menu screen correctlyset up?Unable to turn on the power withthe OPERATE button.Isn’t the REMOTE/LOCAL switch set to REMOTE whenLOCAL FUNCTION in the REMOTE [1/2] Menu screen is notset to ALL KEYS?SERIAL REMOTE control does notfunction.Isn’t REMOTE SEL SER in the REMOTE [1/2] Menu screen setto OFF?For SERIAL REMOTE control, set it to ON or LOC+REM.Unable to operate BR-HD50 withthe IEEE1394 terminal.• Isn’t REM SEL HDV/DV in the REMOTE [1/2] Menu screenset to OFF? To operate with the IEEE1394 terminal, set it toON or LOC+REM.• When the controlling equipment (non-linear editor, etc.) doesnot recognize this unit, either reconnect the IEEE1394cable, or reset the power to the unit.