JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

Also see for BR-HD50U - Compact HDV/DV Format Video Recorder: Information sheet Instruction manual Firmware upgrade guide

Contents

E-31CONNECTIONConnecting the AC adapterConnect the supplied AC adapter to BR-HD50.Memoz Even in the OPERATE OFF mode, a smallamount of electricity will still flow into the unit.z When the unit is in the OPERATE OFF mode,no operation can be performed except that ofthe OPERATE buttons and cassette loading/ejecting. Always attach the supplied ferrite coreto the DC cord. (XPage 29)1. Remove one screw on the back panel of theunit, and remove the DC cord clamp.2. Connect the DC cord of the AC adapter tothe DC IN terminal of BR-HD50.3. To prevent accidental disconnection of theDC cord, insert the DC cord into the clamp,orient the clamp as shown in the figureabove, and secure the clamp to the unit.Use the screw removed in step 1 above tosecure the clamp to the unit.4. Connect the supplied power cord to the ACIN terminal of the AC adapter.5. Connect the power cord to the power out-let.• BR-HD50 is turned on and the OPERATEindicator lights up in red.(OPERATE OFF mode)• If DC IN MODE of the SYSTEM [2/2] Menuscreen is set to “OPE ON”, the OPERATEindicator will light up in green.(OPERATE ON mode)Notez Supply power to BR-HD50 using the supplied AC adapter. Do notuse other power sources.z Do not unplug the DC cord and/or the power cord during recordingor playback.z If the supply voltage is low, an alarm display of “LOW VOLTAGE”is shown.Screw1. ClampSupplied AC adapterSupplied power cordDC cordDC IN terminal3. Clamp2. 4.5.Supplied ferrite coreOPERATE indicatorOPERATEbuttonLOW VOLTAGEAlarm message