38TIMER REC SETATS (AUTO TUNING SYSTEM)VCR EXTENSIONCHANNEL SETUPSYSTEM SETUPSELECT :ENTER : OKMENUEXIT :VCR SETUPAudio MixingWhen playing audio dubbed videotapes, press A.MONITOR to select thesound you want to listen to. PressA.MONITOR repeatedly until "MONO"is displayed on the screen to listen onlyto the dubbed sound. In case of theother on-screen indications only theoriginal sound will be output. It is alsopossible to listen to the dubbed and theoriginal sounds simultaneously. Toaccomplish this, set "AUDIO MIX" to"[ON]" (see right). During playback,press A.MONITOR repeatedly until"STEREO" is displayed on the screen.1 Press SET UP MENU.Press or to selectVCR SETUP . Then pressOK.Press or to selectAUDIO MIX.Press / or OK to select[ON].If you select "[ON]", you canlisten to the dubbed and theoriginal sounds at the sametime.4 Press SET UP MENU repeatedly until the TV pictureappears.Note:To deactivate the AUDIO MIX functionfollow the above procedure from step 1 to3, select "[OFF]", and confirm the settingby pressing SET UP MENU.23AUDIO MIXNICAMVCR SETUPSELECT : /ENTER : OKMENUEXIT :SHARPNESS[OFF][AUTO]AUDIO MIXNICAMVCR SETUPSELECT :ENTER : OKMENUEXIT :SHARPNESS[ON][AUTO]/• Turn ON the TV and set to the video input mode.• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.Then press VCR to select the VCR mode. (The VCR indicatorwill light)Preparation: