JVC 2A73501A User Manual

Also see for HR-XV1EU-C: Service manual Service manual Service manual

Contents

20Preparation:• Turn ON the TV and set to the video input mode.• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Thenpress VCR to select the VCR mode. (The VCR indicator will light)Example: Preset the SAT1 on program position 5.1 Press SET UP MENU.Press or to selectCHANNEL SETUP. Then pressOK.2 Press or to select CHTUNING. Then press OK.3 DEC OFF will blink. Press OK.DEC OFF does not blink anymore. SEARCH will appear.Note:If you wish to store thePREMIERE manually, thedecoder must have beenconnected as on the lower of p.11.During DEC OFF is blinking, press .DEC ON will blink now.Press OK.4 Press (rising frequency) or(falling frequency) once. Thesearch starts. It stops at eachbroadcast automatically (" "change to " 4 "). Press orrepeatedly until the SAT1appears. Only in case of receivingof the weak broadcast (driftingpicture), search dose not stop. Ifyou want to stop, press / or/ .CH TUNINGCHANNEL SETUPCHANNEL MAPPINGSELECT :ENTER : OKMENUEXIT :TIMER REC SETATS (AUTO TUNING SYSTEM)VCR EXTENSIONCHANNEL SETUPSYSTEM SETUPSELECT :ENTER : OKMENUEXIT :VCR SETUPManual TV station presettingATS stores the broadcast automatically.However if you do the ATS underunfavorable receiving conditions,some broadcasts happen to be notfinded by ATS. For these broadcasts,you can store also by manual.Note:Occasionally, the auto search might catcha weak signal and stop. If the TV stationsignal is weak, you shouldn't store thisstation.In that case restart the auto search usingor .CH 1VPSARDOKOK : MENUEXIT :DEC OFFSELECT :CH 1SEARCH : / F. TUNE :MENUEXIT :DEC OFF