Menu
JVC 1010MTH-SW-MT Instructions Manual
                                                                                                        | |
Contents
|
Connection.1-4'6740%100'%6+10*&/+%100'%6+101((%1/210'06176276':+6 5'.'%6K8+&'1+02765'66+0) 8+&'15'672/10+6146;2'*&/+%'%m MONITOR TYPEFor setting the aspect ratio according to the connectedmonitor.Setting Values Description16:9 Set to this value when connected tomonitors with 16:9 aspect ratio.16:9FULL Choose this setting when a 16:9 monitoris connected to display images withoutthe black borders.4:3 PAN&SCAN Set to this value when connecting tomonitors with an aspect ratio of 4:3.Plays back videos with the left and rightedges trimmed off.4:3LETTERBOXSet to this value when connecting tomonitors with an aspect ratio of 4:3.Plays back videos with a black band atthe upper and lower ends.m HDMI CONNECTIONv VIDEO PRIORITY MODESetting Values DescriptionCOMPONENT Set to this value for output at a resolutionof “480p” or higher from the[COMPONENT VIDEO OUT] terminal.HDMI Set to this value when priority is to begiven to the “HDMI OUTPUTRESOLUTION” setting.Memo:v During data output from the [HDMI] terminal, setting to“COMPONENT” automatically outputs data in the“COMPONENT OUTPUT” setting. Setting to “HDMI”outputs data in the “HDMI OUTPUT RESOLUTION” setting.v During data output from the [HDMI] and [COMPONENTVIDEO OUT] terminals, setting to “COMPONENT”automatically outputs data in the “COMPONENT OUTPUT”setting. Setting to “HDMI” outputs data at the “480i”resolution from the [COMPONENT VIDEO OUT] terminal.v When there is no output from the [HDMI] terminal, data isautomatically output in the “COMPONENT OUTPUT”setting from the [COMPONENT VIDEO OUT] terminal.v HDMI OUTPUT RESOLUTIONSettingValuesDescriptionAUTO Automatically selects an appropriateresolution according to the connecteddevice.480p Fixes the resolution at 480p.1080i Fixes the resolution at 1080i.720p Fixes the resolution at 720p.1080p Fixes the resolution at 1080p.Memo:v When the resolution is set to “720p”, videos are output at“1080i” other than those recorded at “720p” even though“720p” is shown on the display.v Depending on the conditions (monitor type 16:9,resolution“720p” and above, aspect 4:3), some of the OSD display ofthe component output may be cut off. In this case, set“VIDEO PRIORITY MODE” to “COMPONENT”.OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals maybe cut off with the above conditions even when“COMPONENT” is selected. In this case, set thecomponent resolution to “480p” or below, or set the monitortype to other settings except 16:9.v BD-VIDEO 24p OUTSettingValuesDescriptionOFF Outputs in the resolution set by “HDMIOUTPUT RESOLUTION”.ON Outputs 24p elements at 24p.Memo:v 24p playback is possible for commercially available BD-Videos or BDMVs that are recorded in 24p. Content otherthan BDMVs that is dubbed or recorded on this unit at 24p,as well as 24p content on SD cards are played back at 60por 60i.v This is applicable for BD-ROM and DVD-Video titles.This is available when connected to a 24p compatiblemonitor.v Elements other than 24p ones are output at 60p.v No video images will be output from the video, S-video andcomponent outputs when the HDMI output resolution is at1080/24p.Settings Menu80 |
Related manuals for JVC 1010MTH-SW-MT
JVC SRC-1020-1ORT Instructions Manual
JVC SR-HD2700E Instructions Manual
JVC SR-HD1700EU Instructions Manual
JVC SR-HD2500US Instructions Manual
JVC LVT2101-001A Instructions Manual
JVC LVT2007-003C Instructions Manual
JVC LVT2007-029C Instructions Manual
JVC 0609SKMLGEEGL Instructions Manual
JVC SR-HD1700US Basic Instructions
JVC CA-NXBD3 Instruction
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved