JBL Cinema BD100 Owner's Manual

Contents

JBL Cinema BD100 Owner's Manual Manual pdf 5 page image

5www.jbl.comEnglishReCeiVeR fRonT-panel ConTRolseject button: Touch this button to eject a disc from the BD receiver’sbuilt-in disc player. Before touching this button, make sure no objects areblocking the disc drawer.disc drawer: Insert a compatible disc into the drawer. The BD receiver’sdisc player will accept 5-inch (12cm) and 3-inch (8cm) discs.information display: Various messages appear on this display inresponse to commands and to show the audio/video that is playing, theBD receiver’s settings or other aspects of the receiver’s status as describedthroughout this manual.uSB port: You can use the USB port to play media files from a USB deviceinserted into the port. Insert the device into the USB port oriented so it fitsall the way into the port. You may insert or remove the device at any time –there is no installation or ejection procedure.You can also use the USB port to perform firmware upgrades. If an upgradefor the receiver’s operating system is released in the future, you will be ableto download it to the receiver using this port. Complete instructions will beprovided at that time.iMporTAnT: do not connect a pc or other uSB host/controllerto this port, or you may damage both the Bd receiver and theother device.power button:• Press the button to toggle the receiver between the On and Standbymodes. NOTE: If the receiver goes for 30 minutes without receiving anaudio signal or a user command, it will automatically enter the Standbymode to conserve electrical power.iMporTAnT: do not turn the receiver’s volume up to or past thepoint where the audio from the speakers becomes distorted.doing so can damage the speakers.Eject ButtonStop ButtonPower ButtonPlay/PauseButtonUSB PortInformation DisplayDisc Drawer