JAI SP-5000M-CXP4 User Manual

Contents

JAI SP-5000M-CXP4 User Manual Manual pdf 57 page image

SP-5000M-CXP4 / SP-5000C-CXP4- 55 -GenICam Name Access Values CategoryBlemish Selector R/W White JAI-CustomBlemish White Enable R/W FalseTrue JAI-CustomBlemish White Detect R/W 2 JAI-CustomBlemish White Detect Threshold R/W 0 to 100 JAI-CustomBlemish White Detect Position Index R/W 0 to 511 JAI-CustomBlemish White Detect Position X R/W 0 to 2559 JAI-CustomBlemish White Detect Position Y R/W 0 to 2047 JAI-Custom8.7. Bayer color interpolation (Only for SP-5000C-CXP4)This function is available only for SP-5000C-CXP4. The SP-5000C-CXP4 uses a CMOS sensor with anRGB Bayer pattern. If the in-camera Bayer color interpolation is not used, the following RAW datacan be output.Gｒ R Gｒ RB Gb B GbGｒ R Gｒ R Gｒ RB GbGｒ RB Gb B Gb B GbB GbGｒ RB GbGｒ RB GbGｒ RB GbGｒ RFig.35 Bayer patternThe RAW data contains only luminance information for each color and outputs as a monochromesignal. The Bayer color interpolation function can complement lacking color information on eachpixel and output RGB color data as the result. Color interpolation compensates for the lack of colorinformation by using information from adjacent pixels. The following is the concept drawing for thecolor interpolation process.Fig.36 Color interpolation concept drawing8.8 Lens controlThe SP-5000M-CXP4 and SP-5000C-CXP4 can be used with 4 different types of auto iris lenses, inaddition to standard lenses with manual iris control. If an auto iris function is to be utilized, thelens type used must be selected in Lens Select.Table -20 Lens selectorGｒB3 Gb2 B4B1 Gb1 B2Gｒ1 R Gｒ2Gb3 B2 Gb4Gb1 B1 Gb2R1 Gｒ R2R3 Gｒ2 R4R1 Gｒ1 R2Gb1 B Gb2