CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA- 53 -In the camera control tool, it is displayed as Line 1 –TTL Out1.11.4.2 Setting of input and output11.4.2.1 How to assign the signal to LineThis function decides which signal is assigned to Digital I/O (Line 1 to Line 8).The following is the example to set Line5 – Opt In 1. In this case, the line source is thesignal connected to Opt In 1. The line format is automatically set to Opto Coupled.The following is the example to set the output signal. It selects the output signal fromLine3 – Optical Out 1 from Line source. In the following example, Exposure Active signalis output. As the line format, TTL is automatically selected.
