CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA- 20 -7. Image output signal7.1. Output imageThe CCD sensor layout with respect to pixels and lines used in the timing and video full frame readout is shown below.1688125112 48162410212364OBOB OBOBActive Pixels OutputVideo Output1624 (H) x 1236 (V)3R GG BR GPixel ( 1,1 )DVAL 16210OB, 10 lines and 2 linesfor vertical and 16 clicksfor horizontal can betransferred on OBTransfer mode.Fig. 15. CCD sensor layoutImportant Note: By using Optical Black (OB) transfer mode, the use can select whether to includeoptical black pixels in the image stream.7.2. Vertical Binning (CM-200GE/CM-200GE-RAonly).The binning functions can be used to achieve higherframe rate or higher sensitivity. The drawback is lowerresolution.Vertical binning is done by adding the charge from pixelsin adjacent lines in the horizontal CCD register.Fig. 11 shows the binning principle. Resolution andframe rate for all combinations are shown in the below table.Fig.16. CM-200GE/CM-200GE-RA binning.The CM-200GE/CM-200GE-RA has ON or OFF function for Vertical Binning:Setting Value for Register address 0xA084 Resolution (pixels) Frame rateOff (no binning) 0x01 1624(h) x 1236(v) 24.98 fps.2:1 binning 0x02 1624(h) x 618(v) 44.49 fps.HXsg1Video outNo V binningV binningHXsg1Video outNo V binningV binning
