Husqvarna YTH1848XP Owner's Manual

Also see for YTH1848XP: Owner's manual Owner's manual Owner's manual

11ELAPSED TIMEAMPS60060HOURS 1/100 0 0 0 0 0 0 0 0 002527OPERATIONKNOW YOUR TRACTORREAD THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTORCompare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments.Save this manual for future reference.FIG. 7Our tractors conform to the safety standards of the American National Standards Institute.ATTACHMENT CLUTCH SWITCH - Used to engage themower blades, or other attachments mounted to yourtractor.LIGHT SWITCH POSITION - Turns the headlights on.THROTTLE CONTROL - Used to control engine speed.CHOKE CONTROL - Used when starting a cold engine.FREE WHEEL CONTROL - Disengages transmission forpushing or slowly towing the tractor with the engine off.BRAKE PEDAL - Used for braking the tractor and startingthe engine.HEIGHT ADJUSTMENT KNOB - Used to adjust the mowercutting height.HOURMETER - Indicates hours of operation.AMMETER - Indicates charging (+) or discharging (-) ofbattery.PARKING BRAKE - Locks clutch/brake pedal into thebrake position.ATTACHMENT LIFT LEVER - Used to raise and lowerthe mower deck or other attachments mounted to yourtractor.LIFT LEVER PLUNGER - Used to release attachment liftlever when changing its position.IGNITION SWITCH - Used for starting and stopping theengine.FORWARD DRIVE PEDAL - Used for forward movementof tractor.REVERSE DRIVE PEDAL - Used for reverse movementof tractor.CRUISE CONTROL LEVER - Used to set forward move-ment of tractor at desired speed without holding the forwarddrive pedal.BRAKEPEDALTHROTTLECONTROLPARKING BRAKEATTACHMENTLIFT LEVERLIFT LEVERPLUNGERLIGHT SWITCHPOSITIONIGNITIONSWITCHFREEWHEELCONTROLATTACHMENTCLUTCH SWITCHHEIGHTADJUSTMENTKNOBAMMETERCHOKECONTROLCRUISE CONTROL LEVERFORWARD DRIVE PEDALREVERSE DRIVE PEDALHOURMETER