Husqvarna TR 36 Operator's Manual

Also see for 36: Workshop manual Operator's manual

Contents

SAFETY INSTRUCTIONS7WARNING: Failure to comply with the following warnings could result in seriousbodily injury or death!DODO Read this entire operator’s manual before operating this machine. Read and understand all warnings,instructions, controls, and symbol definitions contained in this manual, and on the machine.DO always give a copy of this manual to the equipment user. If you need extra copies, call 1-800-776-3328(toll free within the U.S.) or see “contact information” section of this manual.DO keep all guards in place and in good condition.DO wear safety approved hearing, eye, head and respiratory protection.DO read and understand all warnings and instructions on the machine.DO keep all parts of your body away from the blade and all other moving parts.DO know how to stop the machine quickly in case of emergency.DO shut off the engine and allow it to cool before refueling or doing maintenance.DO inspect the base and arms for damage before installing the blade.DO read all safety materials and instructions that accompany any blades used with this machine.DO inspect each blade carefully before using it. If there are any signs of damage or unusual wear, DO NOTUSE THE BLADE.DO mount the blades solidly and firmly, tighten the mounting bolts with a wrench.DO use the correct blade for the type of work being done. Check with blade manufacturer if you do not know ifblade is correct.DO use caution and follow the instructions when loading and unloading the machine.DO operate this machine only in well ventilated areas. Breathing Poison Exhaust Gas could result in death.DO instruct bystanders on where to stand while the machine is in operation.DO establish a training program for all operators of this machine.DO clear the work area of unnecessary people. Never allow anyone to stand in front of or behind the bladewhile the engine is running.DO use caution when lifting and transporting this machine.DO always tie down the machine when transporting.DO use caution and follow instructions when setting up or transporting the machine.DO have all service performed by competent service personnel