Husqvarna SMR Owner's Manual

Also see for 450 Rancher: Operator's manual Operator's manual Operator's manual Spare parts Operator's manual

Contents

3- SPEED / CLOCK / RPM (figure 3)- SPEED: motorcycle speedmaximum value: 299 kmh or 299mph;- CLOCK: clock- Reading from 0:00 to 23:59:59 (the data willbe lost after battery detachment);To reset the clock, push the knob SCROLL (A) for more than 3seconds in order to increase the hours; release the knob andthen, after 3 seconds, it is possible to increase the minutes;- RPM: engine r.p.m. shown on the vertical LED indicator.1- SPEED (kmh or mph) / ODO / RPM (fig-ure 1)- SPEED: motorcycle speed- maximum value: 299 kmh or 299mph;- ODO: odometer- maximum value: 99999 km;- RPM: engine r.p.m. shown on the vertical LED indicator.To replace kilometers with miles or miles with kilometers pro-ceed as follows:1) set to figure 1, stop the engine and push the knob SCROLL(A);2) start the engine while pushing for 3 seconds the knobSCROLL (A).After the kilometers-miles or miles-kilometers setting opera-tion, for 3 seconds, “SET” and miles/mph or km/kmh will beon.NOTEAfter the previously described operation,the ODO setting will be convert and all theothers data will be reseted (the H Counteris unchanged).2- SPEED / H / RPM (figure 2)- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;- H: shows the running hours of the engine (data are saved inpermanent memory every 10 minutes)- Maximum value:9999:59;- RPM: engine r.p.m. shown on the vertical LED indicator.17ENCap3_GB 9-07-2007 16:22 Pagina 17