Husqvarna QCE8600W User Manual

Activating the programme1. Activate the appliance.2. Select the menu: Favourites.3. Press to confirm.4. Select your favourite programmename.5. Press to confirm.10.2 Using the Child LockWhen the Child Lock is on, the appliancecannot be activated accidentally.1. Touch to activate the display.2. Touch and at the same timeuntil the display shows a message.To deactivate the Child Lock functionrepeat step 2.10.3 Function LockThis function prevents an accidentalchange of the heating function. You canactivate it only when the applianceoperates.1. Activate the appliance.2. Set a heating function or setting.3. Press again and again until thedisplay shows: Function Lock.4. Press to confirm.To deactivate the function, press . Thedisplay shows a message. Press againand then to confirm.When you deactivate theappliance, the function alsodeactivates.10.4 Set + GoThe function lets you set a heatingfunction (or a programme) and use itlater with one press of any symbol.1. Activate the appliance.2. Set a heating function.3. Press again and again until thedisplay shows: Duration.4. Set the time.5. Press again and again until thedisplay shows: Set + Go.6. Press to confirm.Press any symbol (except for ) to startthe function: Set + Go. The set heatingfunction starts.When the heating function ends, anacoustic signal sounds.• Function Lock is on whenthe heating functionoperates.• The menu: Basic Settingslets you activate anddeactivate the function:Set + Go.10.5 Automatic Switch-offFor safety reasons the appliance turns offautomatically after some time if a heatingfunction operates and you do notchange any settings.Temperature (°C) Switch-off time (h)30 - 115 12.5120 - 195 8.5200 - 230 5.5The Automatic switch-offdoes not work with thefunctions: Light, FoodSensor, Duration, End Time.10.6 Brightness of the displayThere are two modes of displaybrightness:• Night brightness - when the applianceis deactivated, the brightness of thedisplay is lower between 10 PM and 6AM.• Day brightness:– when the appliance is activated.– if you touch a symbol during thenight brightness (apart from ON /OFF), the display goes back tothe day brightness mode for thenext 10 seconds.– if the appliance is deactivated andyou set the function: MinuteMinder. When the function ends,the display goes back to the nightbrightness.www.husqvarna-electrolux.se26