7. CLOCK FUNCTIONS7.1 Clock functions tableClock function ApplicationMinute Minder To set a countdown (max. 2 h 30 min). Thisfunction has no effect on the operation of theappliance. You can also activate it when theappliance is deactivated.Use to activate the function. Press orto set the minutes and to start.Duration To set the length of an operation (max. 23 h59 min).End Time To set the switch-off time for a heating func-tion (max. 23 h 59 min).If you set the time for a clock function,the time starts to count down after 5seconds.If you use the clockfunctions: Duration, EndTime, the appliancedeactivates the heatingelements after 90 % of theset time. The appliance usesthe residual heat to continuethe cooking process until thetime ends (3 - 20 minutes).7.2 Setting the clock functionsBefore you use thefunctions: Duration, EndTime, you must set a heatingfunction and temperaturefirst. The appliancedeactivates automatically.You can use the functions:Duration and End Time atthe same time if you want toautomatically activate anddeactivate the appliance ona given time later.The functions: Duration andEnd Time do not work whenyou use the coretemperature sensor.1. Set a heating function.2. Press again and again until thedisplay shows the necessary clockfunction and the related symbol.3. Press or to set the necessarytime.4. Press to confirm.When the time ends, an acoustic signalsounds. The appliance deactivates. Thedisplay shows a message.5. Press any symbol to stop the signal.7.3 Heat + HoldConditions for the function:• The set temperature is more than 80°C.• The function: Duration is set.The function: Heat + Hold keepsprepared food warm at 80 °C for 30minutes. It activates after the baking orroasting procedure ends.You can activate or deactivate thefunction in the menu: Basic Settings.1. Activate the appliance.2. Select the heating function.3. Set the temperature above 80 °C.4. Press again and again until thedisplay shows: Heat + Hold.5. Press to confirm.When the function ends, an acousticsignal sounds.ENGLISH 21