Husqvarna DXR140 Operator's Manual

Also see for DXR140: Price list Operator's manual Quick start guide

English – 31ACCESSORIESService controllerThis service controller works only on generation 2-* and 3-* machines. The service controller comprises two connectors,K22 (A) and K23 (B), and a maneuvering unit (C).*switch S1 on the electric cabinet must be in position 2.B ACD137854910121162What is what on the maneuvering unit?The maneuvering unit has a machine stop (D) and 12toggle switches with various functions.1 On/Off (I / O)2 Mode selector3 Arm 1 (out/in)4 Arm 2 (up/down)5 Arm 3 (up/down)6 Tools (up/down)7 Telescopic arm (out/in)8 Caterpillar tracks, left (forward/back)9 Tower (rotation)10 Caterpillar tracks, right (forward/back)11 Outrigger, active- Left - left side (x2)- Center - all- Right - right side (x2)12 Outrigger, move (up/down)The service controller is used only for moving themachine to service.The machine must be in drivable condition. The servicecontroller replaces only the control system and remotecontrol.Connect the service controller.• Unscrew the protective cover and lift it off. Unscrewthe covers over the control modules and remove them.• Connect the service controller by transferring theconnectors from the machine’s control modules K23(3 outlets) and K22 (2 outlets) to the correspondingcontacts on the service controller.The lamp on the service controller comes on wheneverything is connected correctly.• Choose the type of machine that the service controlleris to control.- SERIES 1xx - DXR140- SERIES 2/3xx - DXR250, DXR270, DXR300, DXR310• Put the I/O switch to 'I'. The machine’s lighting comeson.• See earlier overview for maneuvering via the servicecontroller.NOTICE! The service controller is not for working withand tools can not be activated.! WARNING! Nobody is permitted to be withinthe machine’s risk area when work isunderway. The machine’s risk area can varyduring the course of the work. Study thepossible risks before starting to move. Ifground conditions change while moving isin progress, the risk zone must be redefined.