Husqvarna 967271801-00 Operator's Manual

15CONTROLSThe 20 amp primary fuse is located on the lefthand side of the machine. It is accessed by tiltingthe seat forward. The fuse is a flat pin type usedin automobiles.FuseSeat Adjustment LeverThe seat can be adjusted lengthways. Whenmaking adjustments, the lever below the right sideof the seat is pulled up, after which the seat canbe moved backward or forward.Fuel Shut Off ValveThe fuel shut off valve is located at the right rearof the seat. The valve is off when the handle tab isturned perpendicular to the fuel line.Cutting Height LeverIMPORTANT INFORMATION To obtain aneven cutting height, it is important that the airpressure in all tires is 15 psi / 103 kPa / 1 bar.IMPORTANT INFORMATION Always raise thedeck to the highest position for transport.To set the deck cutting height, pull the cuttingheight lever inwards and move it to the desiredheight notch.Bypass LinkagesWARNING! Bypass linkages arelocated close to the muffler. To prevent burns,the engine should be shut off and allowedto cool before the bypass linkage levers arehandled.Transaxle bypass linkages must be engagedwhen pushing or pulling the mower. The releaselevers are located on each side of the rear of theunit below the rear engine guard. See MovingMachine By Hand in the Operation section.