Husqvarna 36 Workshop Manual

Also see for 242XP: Operator's manual

English – 45All saws except 3120 3120Slide the spring over the knee link's stud andpress down the opposite end of the spring intoits recess.Fit the cover over the spring.Fit the spring and screw onto the pressurerod on the brake band.Note! Plastic sleeve.Bottom the screw onto the pressure rodthread and back off 4-5 turns.Grease and fit the ratchet. Set the unit in avice, positioned in the jaws as shown below.! WARNING!If the clutch cover slides out ofthe vice's grip the spring can flyout with immense force resultingin personal injury!3120 continues on next page.Continues on next page.SAFETY EQUIPMENT