S E C T I O N 5Specifications & AccessoriesSecurity Control1. Physical: 12-1/2” W x 14-1/2” H x 3” D (318mm x 368mm x 76mm)2. Electrical:VOLTAGE INPUT: 16.5VAC from plug-in 25VA transformer, ADEMCO 1321 (in U.S.A.)RECHARGEABLE BACKUP BATTERY: 12VDC, 4AH (sealed lead acid type). ChargingVoltage: 13.8VDC.ALARM SOUNDER: 12V, 2.0 Amp output can drive 12V BELLS or can drive one or two702 (series connected) self-contained 20-watt sirens. Do not connecttwo 702s in parallel.AUXILIARY POWER OUTPUT: 12VDC, 600mA max.NOTE: For UL installations, Alarm Sounder plus Auxiliary Power currents shouldnot exceed 600mA total.FUSE (if installed): Battery (3A) No. 90–12 (PC board may have a PTC device instead ofa fuse. The PTC serves as an automatically resetting fuse.)3. Communication:FORMAT SUPPORTED:ADEMCO Express: 10 characters/sec, DTMF (TouchTone) Data Tones,1400/2300Hz ACK, 1400Hz KISSOFF.ADEMCO Low Speed: 10 pulses/sec, 1900Hz Data Tone, 1400Hz ACK/KISSOFF.Radionics/SESCOA: 20 pulses/sec, 1800Hz Data Tone, 2300Hz ACK/KISSOFF.Can report 0-9, B-FAdemco Contact ID 10 characters/sec., DTMF (TouchTone) Data Tones,1400/2300Hz ACK, 1400Hz KISSOFF.LINE SEIZE: Double PoleRINGER EQUIVALENCE: 0.1BFCC REGISTRATION No.: 5GBUSA-44003-AL-E4. Maximum Zone Resistance: Zones 1–8 = 300 ohms excluding EOLR standard zonesCompatible DevicesKeypads: 6150 Fixed-Word Keypad, 6160 Alpha Keypad, 6150V and6160V Voice Keypads, 6270 Touch Screen Keypad,Symphony Advanced User InterfaceWireless Receivers: 5881L/5882L: accepts up to 8 transmitters5881M/5882M: accepts up to 16 transmitters5881H/5882H: accepts up to system maximum transmitters5800TM Transmitter Module (used with Wireless 2-Way Keypads)5883 Transceiver: accepts up to system maximum transmitters6150RF Keypad/Transceiver: accepts up to system max. transmittersZone Expansion: 4219 WIRED EXPANSION MODULE4229 WIRED EXPANSION/RELAY MODULERelay Module: 4204 RELAY MODULEPhone Modules: 4286VIP PHONE MODULELong Range Radio 7845GSM, 7845i-GSM(Communication Device)5-1