Honeywell LYNXR-2 Programming Manual

Also see for LYNXR-2 Series Security System: Installation and setup guide User guide

Contents

Honeywell LYNXR-2 Programming Manual Manual pdf 14 page image

- 14 -✻✻✻✻81 ZONE LISTSUse this mode to define zone lists for Powerline Carrier Devices and/or for the chime by zone feature. Press ✻81while in programming mode.Note: Entering a number other than the one specified may give unpredictable results.8 I ZONE LIST PROGRAMMING0 = Exit mode, upon which this prompt blinks.1 = Enter modeA 0 I ZONE LIST NUMBEREnter the 2-digit zone list number (01-03) to be programmed (use zone list 03 for chime by zone feature).[✻] = Continue00 = Exit mode (displays blinking 81; enter ✻ + desired data field or menu mode number)b zz ZONE ENTRY TO LISTEnter the 2-digit zone number (zz) to be added to this zone list. The system will announce the VoiceDescriptor for the selected zone, if it is programmed.[✻] = Accept zone number and enter the next zone number00 = Accept zone number and continue to next promptC DELETE ENTIRE ZONE LIST?0 = Don’t delete; continue to next prompt1 = Delete the current zone listd DELETE SPECIFIC ZONES FROM LIST?0 = Don’t delete; continue to next zone list number (prompt A 01)1 = Continue to delete zones promptE DELETE ZONESEnter the 2-digit zone number to be deleted from the current zone list. When deleting a zone(s) from thezone list, if the selected zone has a Voice Descriptor programmed, upon deletion it will be announced asa confirmation that it has been deleted.[✻] = Delete zone and enter next zone to be deleted00 = Return to next zone list number (prompt A 01)