Honeywell LYNX Touch SIA Manual

Contents

Honeywell LYNX Touch SIA Manual Manual pdf 6 page image

Screen Display Function & Programming Options- 6 -Program Communications5000-100-132-V0CommunicatorCommunicatorProgram the following options:Communications Path APLCity ID CS ID Sub IDSupervision Old Alarm TimeRemote Acc. Comm. Multi Mode Comm.GSM Fault Time ORIP Fault TimeCommunications PathNoneCommunications PathNoneIPGSMWiFiWiFi & GSMAPLDisabledAdvanced Protection LogicEnabledDisabledCity ID Primary City IdentificationEnter 2 digits01-99CS ID Primary Central Station IdentificationEnter 2-digits (HEX)01-FESub ID Primary Subscriber IdentificationEnter 4-digits0001-9999Supervision24 HoursSupervision24 HoursNone30 DaysOld Alarm Time10 MinutesOld Alarm Time10 Minutes 15 Minutes30 Minutes 1 Hour2 Hours 4 Hours8 Hours 12 Hours24 HoursRemote Acc. Comm.DisabledRemote Access CommunicationDisabledEnabledNote: If enabled the following option will be active.Multi Mode Comm.DisabledMulti Mode CommunicationDisabledRelay ReportsEnhanced ReportsGSM Fault Time (min)00GSM Fault Time (min) (displayed if GSM is selected as Communications Path)Enter 2-digits00-99IP Fault Time (min)00IP Fault Time (min) (displayed if IP is selected as Communications Path)Enter 2-digits00-99Use DHCPYesUse DHCPYesNoNote: If disabled the following options will be active.NIC IP Address255.255.255.255IP Fault TimeEnter 4 part address