Honeywell Domonial User Manual

Also see for Domonial: User manual Technical specifications User manual User manual User manual

Contents

Honeywell Domonial User Manual Manual pdf 11 page image

✔ Enter the 4 digit master code (user 1)✔ Select and enter an existing digit user ID (0-9)✔ Present the new key TAG✔ A double beep on the keypad will confirm acceptance of the new TAG.Exit programming mode by pressing key.WARNING : The system will automatically exit programming mode after 15 seconds if nokeys have been pressed and the red light will be timed off. If this occurs you must start thisprocess again from the beginning. SENDING A PANIC SIGNALYou can send an instant panic alarm whenever you feel threatened whilst at home:✔ Press and hold the “SOS” key simultaneously :✔ The sounder is triggered (as programmed),✔ The ARC is informed.The “PANIC” function is operative even when your system is not armed.You can stop the sounder manually by pressing key of the keyfob or by entering code, onthe keypad.Stopping the sounder does not interrupt the transmission to the ARC. ENTRY DELAYThe entry delay gives you the time necessary to enter your access code or use your key TAGon the keypad to disarm your security system. WRONG CODE PROTECTIONIf your enter 5 successive wrong codes, the keypad is blocked for 5 minutes.+01 2 34 5 68 97SOS11