Hasselblad H2F User Manual

Also see for H2F -: Datasheet User manual

Contents

Hasselblad H2F User Manual Manual pdf 56 page image

561 23 45 67-%.5$2)6%%NTER&$2)6%%NTER&$2)6%3AVE8&2 In the following list, the options marked in red are the default settings. So,in the case of the User button, for example, as None is the default therewill be no reaction from the camera until you make a specific choice andsave it.If you want to reset the sensor unit to the default setting for all options,press the ON.OFF button quickly to enter Profiles, select Standardand then press Load. As a shortcut to the Custom Option level, press MENU and thenthe USER button. After making any changes, press the shutterrelease button to save the new setting.4.1 Custom options1) Press the MENU button on the grip.2) Turn the front control wheel until Settings appears.3) Press the DRIVE (Enter) button on the grip.4) Turn the front control wheel to access 4.1 Custom options.5) Press the DRIVE (Enter) button to access the 32 choicesavailable.6) Turn the front control wheel to the desired Option.7) Turn the rear control wheel to the desired Setting.8) Press Save4 SettingsFrom the Settings screen you can access three main sub-settings:Custom options, Image Info and System status by turning thefront control wheel. From each of these three sub-settings you can accessfurther screens. Custom options has 32 screens, Image info has twomore screens each with more choices and System status has two morescreens. Look at the main menu chart to get an idea of where all the op-tions are on the menu treeoptions availableCUSTOM OPTIONSSettings / Custom Options