Harmar Mobility HIGHLANDER EPL400 Installation And Owner's Manual

Contents

Harmar Mobility HIGHLANDER EPL400 Installation And Owner's Manual Manual pdf 3 page image

When You Receive the Lift and Enclosure• Check the lift and enclosure for shipping damage. If you see any damage, contact the freight carrier tofile a damage claim.• Verify that the packing list attached to the exterior packaging reflects your intended order.• Verify that you have received the items on the packing list.SpecificationsPayload Capacity 750 lbsVertical Travel 54” – 171”Height 77” – 197”Foot Print VARIESPlatform Sizes 36” x 60” or 42” x 60”Input Voltage 115vac - 20a (or 24 VDC for DC lift, optional)Control Voltage 24vac or 24vdcPlatform Speed 10 ft/minMotor 1/2hp-90vdc or 1/2hp-24vdcSafety• Read all instructions in this manual before installing or operating the lift.• Do not exceed the maximum payload capacity of 750 lbs.• Do not ride on the lift until it is anchored in place.• This product is designed only for lifting people and wheel chairs. Do not use it for any other purpose.• Always wear eye protection while installing or servicing this product.• Always disconnect this product from the electrical source before servicing it.• Only use the fasteners supplied with this lift.• Do not wear loose clothing or jewelry when working on this product.• Do not disable any safety equipment or switches supplied with this lift.• Stay away from all drive train components while the lift is operating.3