Harman AMX MT-2002 Quick Start Manual

Harman AMX MT-2002 Quick Start Manual Manual pdf 1 page image

AV FOR AN IT WORLD ®QUICK START GUIDEMT-2002 20.3” Modero G5 Panoramic Tabletop Touch PanelOverviewThe MT-2002 20.3” Modero G5 Panoramic Tabletop Touch Panel(FG5969-35) features the G5 Graphics Engine to provide fast and smoothanimations and transitions, as well as a Quad Core Processor.The MT-2002 features a panoramic capacitive multi-touch screen thatprovides users access to multiple applications with minimal navigation. Thedistinctive, low-profile design is engineered to sit perfectly on a table withoutobstructing views.Sleep buttonSleep buttonUSB Ports (2)Cable slotFIG. 1 MT-2002Product SpecificationsMT-2002 SPECIFICATIONSDimensions (HWD) 9 3/16” x 20 3/8” x 5 7/8” (235 mm x 519 mm x 150 mm)Weight 12.3 lbs (5.58 Kg)PowerConsumption Full-On: 35 W (12V ..., 2.9A)Standby: 7 W (12V ..., 0.58A)External PowerSupply RequiredRequires one of these AMX power sources (not included):• PSR5.4 Power Supply, 12 VDC, 5.4A, 3.5mm Phoenix Connector withRetention Screws (FG423-48)• MXA-MPL Modero X/S Series Multi Preview Live (FG5968-10)Certifications • FCC Part 15 Class B• AS/NZS CISPR 32 Class B• CE EN 55032, 55035, 60950-1• CB Scheme IEC 60950-1• IC• IEC/EN-60950• UL 60950-1• RoHS/WEEE compliantEnvironmental • Temperature (Operating): 32°F to 104°F (0°C to 40°C)• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)• Humidity (Operating): 20% to 85% RH• Humidity (Storage): 5% to 85% RH• Power (“Heat”) Dissipation:On: 119.4 BTU/hrStandby: 23.9 BTU/hrIncludedAccessories• Locking 2-pin Phoenix connector (41-0002-SA)• MXA-USB-C, USB Port Cover Kit (FG5968-18)• HPG-10-10K, 3/4” Mini-Grommet (FG570-01)• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)Connector LocationsTwo Type A USB ports are located on the rear right corner of the device (FIG. 2).Type A USB Ports SpeakerSleep buttonFIG. 2 MT-2002-REAR VIEWUSB peripherals (mouse, keyboard, etc.) may be connected to either of the twoUSB ports on the rear of the device.The power and Ethernet connectors, as well as an additional USB port arelocated on the bottom of the device (FIG. 3).The underside USB port, as well as the two rear USB ports, may be used with aflash drive for page transfers or firmware upgrades.Ethernet10/100 Port Type A USB Port12V ... Power PortFIG. 3 MT-2002 UNDERSIDE CONNECTORSThe MT-2002 does not have individual channels on the base of the deviceto allow passage of cables from underneath the base. Instead, it has one slot atthe base to allow options on cable configuration, with channels for securingpower and Ethernet cables (FIG. 4).FerriteTie-wrap channelsTie-wrapFIG. 4 TIE-WRAP FOR POWER CONNECTOR FERRITEEach channel side has slots for attaching tie-wraps to secure each cable. Theferrite on the power cable must be secured with the included tie-wrap duringinstallation to prevent the possibility of the panel not sitting flush on the table.Other cables may be secured with tie-wraps if desired, but this is not necessary.Wiring GuidelinesThe MT-2002 uses a 12V ... -compliant power supply to provide power tothe panel via the 2-pin 3.5 mm captive wire PWR connector.The incoming PWR and GND wires from the power supply must be connected tothe corresponding locations within the PWR connector.Note: Apply power to the panel only after installation is complete.Note: Connecting power to the MT-2002 should be done using the included2-pin 3.5mm captive wire connector included with the device. This connectoris retained within its port with locking screws instead of the pins on each side ofstandard captive wire connectors, and using force to insert a standard captivewire connector may damage the device.

/ 2

Related manuals for Harman AMX MT-2002