(10) Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-27locked. The ignition circuit are cut off.BWARNINGBefore turning the ignition switch to the “4”position, safely stop the motorcycle and support itwith the main stand.BWARNINGNever attempt to move the motorcycle when thesteering is locked.BWARNINGDo not turn the ignition switch key to the “4”position when riding the motorcycle, otherwise themotorcycle will lose control.ANTI-THEFT LOCK LIDPosition OPEN Position SHUTThis motorcycle is equipped with a anti-theft lock lid onthe ignition switch.To close the lid, make the protruding position 2 of theignition switch key 1 align with and enter the groove ofthe lid 3, and turn from position “OPEN” 5 to position“SHUT” 4.To open the lid, make the protruding position 2 of theignition switch key 1 align with and enter the groove ofthe lid 3, and turn from position “SHUT” 4 to position“OPEN” 5.NOTE: Close the anti-theft lock lid before you leave themotorcycle, for it may significantly improve security.NOTE: Washing the motorcycly in winter or, parking themotorcycle in outside, the anti-theft lock lid must beclosed. Preventing the water into the lid and freezing,otherwise the seat lock can not be open. Don’t rotate thekey forcible to open the seat lock, otherwise the seat lockwill be destroyed. Above the zero celsius temperature,please park the motorcycle for a few minutes, the lid rotatenaturally, so the seat lock can be opened.SADDLE LOCK SWITCHTo unlock the saddle, insert theignition switch key into the saddlelock and turn it clockwise. To lockthe saddle, push it to make its springbolt fastened in the locking position.(10) Haojue HJ110-5 99011H53150H000 V01 EN 2016-5-279