Hanna Instruments Edge Instruction Manual

Hanna Instruments Edge Instruction Manual Manual pdf 22 page image

Setup/Installation22ViewingLogged DataIf no data was logged for the selected measurementrange, the instrument displays the followingmessages (ex. for pH range):No Manual LogsNo Stability LogsPress CFM to enter inside lot information to view memorized records.Use the ARROW keys to toggle between different records.Use u to display GLP data.Press CLR then CFM when deleting records or lots.Press RCL to exit the lot you are viewing.Press RCL to return to the measurement screen.Delete Record/LotPress RCL and select measurement log.Use the p q keys to select the Manual/Stabilityrecords or Interval lots to delete. The instrument willdisplay “CLEAR MANUAL” for MANUAL, “CLEAR STAB”for STABILITY.For Interval lots, the message “Clear” followed by theselected lot will be displayed with “CFM” tag blinking.Press the ARROW keys to select a different lot. PressCFM. The instrument will display “PLEASE WAIT”.For Interval, use the p q keys to select a differentlot. Press CFM. The instrument will display “PLEASEWAIT”.“CLEAR DONE” is displayed for a few seconds afterthe selected Interval lot is deleted.