Hanna Instruments Edge Instruction Manual

Hanna Instruments Edge Instruction Manual Manual pdf 17 page image

Setup/Installation17LCD Contrast Permitsmodificationof the displaycontrast forvarious lightingconditions1 to 8 3 AvailableFlash FormatOnly seen whenlog errors arepresent.Permitsformatting theflash drive.On or Off OFF AvailableMessageTransitionUser may choosehow messagesare displayed on3rd LCD line ofdisplay.Word scrollmessages orletter scrollmessagesLetter scrollmessagesAvailableReset Config ToDefaultPress the MODIFY key and CFM (when prompted) toreset parameters.Available:RESETS withBasic Mode OFF.InstrumentFirmware/ ProbeFirmwareDisplays firmwareversion of meter.Using the ukey switches toProbe firmware(if connected)and diagnosticmade fortroubleshooting.View only Currentfirmwareversion.AvailableMeter ID 4 digit numeric User selectable 0000 AvailableNote: Parameters that are grayed out are seen under special conditions only.edge™ offers a basic operation mode that streamlines measurementconfiguration for pH and EC measurements and is useful for many routineapplications. Basic pH SETUP reduces parameter selection to the basic set.The meter limits calibration to 5 standard pH buffers; 6.86, 7.01, 4.01, 9.18and 10.01 buffers. All pH measurements will display, log and export with 0.01pH resolution. Interval logging is also eliminated. Manual and Manual stabilityLogs on demand are still functional. pH CONDITION, RESPONSE graphs are notdisplayed, giving the display a “Basic” measurement screen with just pH dataBasic ModeGeneralSetup