Hanna Instruments Edge Instruction Manual

Hanna Instruments Edge Instruction Manual Manual pdf 20 page image

Setup/Installation20Pressing the LOG key again will stop the Intervallogging session. The “LOG STOPPED“ message willbe displayed for a few seconds.If a sensor failure occurs during interval logging, themessage “OUT OF FREE SPACE” will alternate withlogging informationManual LoggingSelect Manual in the SETUP menu. To initiate aManual log, press the LOG key while the instrumentis in measurement. The “PLEASE WAIT” screen willbe displayed briefly followed by a screen indicatingthe measurement has been saved and then the logrecord number.Following the saved and recorded number, theamount of free space will be displayed. The “LOG”tag will be displayed on all 3 screens.Stability LoggingSelect Stability and choose measurement stabilitycriteria in the SETUP menu. Only Stability Mediumis available in Basic mode. To initiate the Stabilitylog, press the LOG key while the instrument is inmeasurement.The “PLEASE WAIT” screen will be displayed brieflyfollowed by a screen showing the stability tag,“LOG” tag and a “WAITING” message. The log can bestopped while the “WAITING” message is displayedby pressing LOG again.LoggingFunction