The following must be confirmed before calling for service:ProblemThe dryer does notstartPossible Cause● Is the power supply plugged in and switched on.● Plug another appliance into the wall socket totest if there is power.● Check if a drying program has been set;● the Start/Pause button has been pressed;● The water collection box is full;The drying result is notgood and the dryingtime is too long.●Is the drying program setting correct;●Has the filter screen been cleaned ;●Is the condenser blocked;● Does the amount of the loaded laundryexceed the rated load;● Has the loaded laundry been spun dry;●Is the vent duct blocked;● Has the surface of the inside of the drumgot a deposit layer forming, if so clean thedrum interior;The remaining timedisplay is halted, or theremaining time displayedis skippingThe remaining time will be adjusted and correctedcontinuously and automatically based on thefollowing factors:●Type of laundry;●Loaded amount;●The degree of spinning dry of laundry;●Ambient temperature;The automatic adjustment is a normal operation.E2E5E6Prompt and Alarm InformationIn case of an improper operation or trouble with the machine when itoperates, the code corresponding to the trouble will be displayed on thescreen:Code Category Cause SolutionsTrouble codeTrouble codeTrouble codeThere is no change inthe temperatures ofthe laundry in the tubContact a professionalservicemanThe thermal sensoropen-circuited or shortcircuitedContact a professionalservicemanDrain pump fails Contact a professionalservicemanStart the dryer,but itdoes not start and thescreen displayed “End” .● Is the door closed tightly;● The loaded laundry has reached the requirmrntsfor the drying setting.● Is there load into the tub;Trouble shooting Trouble shooting