1Cleaning the surfaceWipe the body of the dryer and the control panel with a damp cloth.Remember not use any organic solvent or corrosive agent to avoiddamage to the machine.2. Cleaning the filter screenTo ensure a good ventilation during drying,the filter screen must be cleaned after everydrying program is complete.Open the door and remove the filter screenfrom the machine. Open the screen and cleanoff the dust on the screen with a wet towel. Aftercleaning, put the screen back in place.3. Emptying the water collection boxDuring operation , steam condenses intowater and is collected in the box.The box mustbe emptied after the program is complete.-Hold the handle and pull the box outwards toremove it. keep it level to prevent the waterfrom overflowing;-Pour away water. Note: thewater can not be used for drink or for foodprocessing;-Put the box back in place.If the box has notbeen emptied, the dryer will sound an alarmwhen the box is full. The indicator light comeson while the box is emptied and the dryer willstop. It will not restart until the box is emptied.4.Cleaning the condenserThe condenser must be cleaned monthly.Switch off the power supply before cleaning.-Hold the protrusions on both sides of thelower deco panel and open it.-Using a coin or other tool, push the slides on the cover to the positionas shown in the figure and then remove the cover;-Turn the condenser's handle 90 degrees in the direction as shown inthe figure;-Remove the condenser from the dryer;-Clean the condenser with a brush or flush with by a water jet;Note: Do not use a sharp tool in cleaning the heat exchanger, otherwiseit may damage its sealing performance;-Put the condenser back in place and lock up the cover;-Put the lower deco panel back in place.5. Cleaning the drumAfter the dryer has operated fora time, fabric caring agents orcalcium contained in the water willform an almost invisible layer onthe inside of the drum.This makes the dryer not able toreliably and accurately identify thedryness of the laundry. So the insideof the drum, especially the stainlesssteel pieces on the blades must becleaned regularly by a wet cloth.ACleaning and maintenance Cleaning and maintenanceB C D