Dimensionsa = 855 mmb = 620 mmc = 595 mmWeight = 43 kgPacking accessoriesChecklist of the accessories and materials provided with the machine:QuantityTo ensure the dryer operates normally, attention must be paid to thefollowing instructions;Ƶ The dryer must be level when installed. Its bottom is equipped withadjustable feet. Adjust these 4 feet to level the unit before operation˗Ƶ Check whether there is any damage to the dryer during transportation.Any damaged dryer must not be used. if the unit is damaged, contactyour dryer supplier;Ƶ The dryer must be kept away from flammable substances˗Ƶ The surrounding environment must be dry and ventilated;ƵTo allow the dryer to perform better, the ambient temperature shall not belower than 10ć nor higher than 35ćChange the door-opening directionIf the direction of the dryer's door is not suitable to the location, its opening directionmay be changed. The procedure is as follows:1. Unscrew the 4 hinge screws holding the door onto the machine and removethe door.2. Unscrew the door catch and prise out the catch cover on the opposite sideof the door and transpose them.3. Unscrew the door hinges and prise out the hinge covers on the opposite sideof the door and transpose them.4. Remove the 4 blanking plugs from the screw holes on the machine and insertthem in the holes on the other side.5. Refit the door on the opposite side of the machine.a-door hinge b-catch cover c-doord-hinge cover e-door catch f-blanking plugName Owner'smanual Certificate ofConformity DrainpipeInstallation InstallationbcFGHEDIa