SERVICE MANUALModel: HB21FSSAA, HB21FG*18Issue 2010-12Rev. Ref1012S008V03-6. Assemble the handle(1) Assemble the fridge door handleFirstly, insert the handle connectors into the hole of fridge door (Fig. 1).Then take out the fridge handle, align the hole of handle head to the connector, install the handle tothe connector. Use inner-hexagon to fix the side fixing screws on the handle head tightly (Fig. 2).The handle can be dismantled by reverse steps.(2)Assemble the freezing door handleFirstly, insert the handle connectors into the hole of freezing door (Fig. 3).Then take out the freezing handle, align the hole of handle head to the connector, install the handleto the connector. Use inner-hexagon to fix the side fixing screws on the handle head tightly (Fig. 4).The handle can be dismantled by reverse steps.(Fig. 3) (Fig. 4)3-7. Defrosting system disassembly and inspectionSTEP-1: After take out all drawers, lift the air passage of freezer; take down the cover of freezer airpassage. Please pay attention to not break the wire of fan motor, and then disconnect the fanconnector.(Fig. 1) (Fig. 2)