HP Z400 - Workstation Function Manual

Also see for FL863UT - Workstation - Z400: Hardware installation Software installation Installation guide Faq Installation guide

Contents

Configuring RAID devicesThis chapter describes how to configure SAS and SATA RAID devices, and includes these topics:TopicsMaximum hard drive configurationsConfiguring SATA RAID devicesConfiguring SAS RAID devicesFor additional information about configuring RAIDs, see http://www.hp.com/support/RAID_FAQs. Forinformation about preparing the workstation for RAID configuration, see http://www.hp.com/support/workstation_manuals.Maximum hard drive configurationsThis section lists the maximum number of hard drives supported on HP workstations for RAIDconfigurations.NOTE: This section applies to internal workstation configurations that do not use add-in cards andJBODs.TIP: Use the table values to determine workstation-specific maximum number of hard drives asdiscussed the sections below.Table 7-1 Maximum hard drivesWorkstation SATA hard drive SATA SFF*hard driveSAS hard driveZ800 5 6 5Z600 3 4 3Z400 4 4 4* Small form factor hard driveENWW Maximum hard drive configurations