LSI SAS 3041E Serial Attached SCSI RAIDHost Bus Adapter installationIntroductionThis document describes how to install an LSI SAS 3041E Serial Attached SCSI (SAS) Redundant Arrayof Independent Disks (RAID) Host Bus Adapter (HBA) in HP and xw Workstation series. Proceduresare included for hard drives mounted in hard drive bays and optical drive bays.Kit contents● LSI SAS 3041E SAS RAID HBA (RAID controller card)● SAS driver CD● Hard drive activity LED cables● Installation instructions (this document)● Warranty informationBefore you beginTo view QuickSpecs and determine the compatibility of this product with your HP workstation, seehttp://www.hp.com/go/productbulletin.© 2006–2009 Hewlett-Packard Development Company, L.P. Printed in the U.S.ENWW Introduction 1