Manufacturer’s Name: Hewlett-Packard CompanyManufacturer’s Address: 3404 East Harmony RoadFort Collins, CO 80528U.S.A.declares that the productProduct Name: z400 Computer WorkstationRegulatory Model Number: FCLSA-0801Product Options: allconforms to the following Product Specifications and Regulations:Safety IEC 60950-1:2001 / EN 60950-1:2001+A11:2004IEC 60825-1:1993/A2:2001 / EN 60825-1:1994 + A1:2002 + A2:2001 Class 1China GB4943-2001EMC EN 55022:2006 Class BEN 55024:1998+A1:2001+A2:2003EN 61000-3-2:2000EN 61000-3-3:1995+A1:2001+A2:2005U.S.A. FCC Part 15, Class BJapan VCCI Class BAustralia/New Zealand AS/NZS CISPR22:2006 Class BChina GB9254-1998 / GB17625.1-2003 HarmonicEuP EC No. R1275/2008 / IEC 62301:2005and is certified or verified by:culus UL Listed to UL60950-1:2006, CSA C22.2 No. 60950-1-03 File E324097Supplementary information:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMCDirective 2004/108/EC and the Energy Use Directive 2005/32/EC and carries the CE-marking accordingly.This product is assigned a Regulatory Model Number (RMN) which stays with the regulatory aspects of thedesign. The RMN is the main product identifier in the regulatory documentation and test reports, this numbershould not be confused with the marketing name or the product numbers.This product was tested in a typical Hewlett Packard computer configuration. .Fort Collins, CO, U.S.A. 4-Nov-09For Compliance Information ONLY, contact:European contact: Hewlett-Packard, HQ-TRE, Herrenberger Straße 140, D-71034 Böblingen(FAX: +49-7031-14-3143)Americas contact: Hewlett-Packard, WGBU Quality Manager, 3404 E. Harmony Rd., Ft. Collins, CO 80528, U.S.A.(FAX: (970) 898-4556)Declaration of Conformityaccording to ISO/IEC 17050-1 and EN 17050-1